OROD Company PCB Copy Board Work Results

Now Part Family PIC32MX7xx unlock is very hard,

MCU Core


80MHz/105DMIPS, 32-bit MIPS M4K® Core

USB 2.0 On-The-Go Peripheral with integrated PHY

10/100 Ethernet MAC with MII/RMII Interfaces

2 x CAN2.0b modules with 1024 buffers

8 Dedicated DMA Channels for USB OTG, Ethernet, and CAN

5 Stage pipeline, Harvard architecture

MIPS16e mode for up to 40% smaller code size

Single-cycle multiply and hardware divide unit

32 x 32-bit Core Registers

32 x 32-bit Shadow Registers

Fast context switch and interrupt response

MCU System Features

512K Flash (plus 12K boot Flash)

128K RAM (can execute from RAM)

8 Channel General Hardware DMA Controller

Flash prefetch module with 256 Byte cache

Lock instructions or data in cache for fast access

Programmable vector interrupt controller

Analog Features

Fast and Accurate 16 channel 10-bit ADC,

Max 1 Mega sample per second at +/- 1LSB, conversion available during SLEEP & IDLE

Power Management Modes

RUN, IDLE, and SLEEP modes

Multiple switchable clock modes for each power mode, enabling optimum power settings

Debug Features

Eight hardware breakpoints (6 Instruction and 2 Data)

Two wire programming and debugging interface

JTAG interface supporting Programming, Debugging, and Boundary scan

Other MCU Features

Fail-Safe Clock Monitor – allows safe shutdown if the clock fails

2 Internal oscillators (8MHz & 31KHz)

Hardware RTCC (Real-Time Clock and Calendar with Alarms)

Watchdog Timer with separate RC oscillator

Pin compatible with 16-bit PIC® MCUs

Serial Communication Modules allow flexible UART/SPI/I2CTM configuration.

Relevant IC unlock: